Simmer slalom equipment presents for 2019: the 3XS table, drawn by Aurelio Greens, and the SCR 2019, the new model of sailing race.
The 3XS is drawn by the legendary shaper Italian Aurelio Greens, It has over 20 years of experience with the slalom boards. Over the past five years its boards have won more World Championships PWA Slalom than any other shaper. The Simmer 3XS brings with it some radical concepts to get the perfect balance between the control in extreme acceleration and top speed, that is needed to win a Slalom race. The border is manipulated in such a way as to ensure the table maximum control in all conditions. Thanks to its stern the wacky round corners and fast starts with 3XS, keeping control at high speeds. The edges remain parallel to the center of the table so you have a larger bow that is important for Planar prematurely.
The rocker is designed for maximum speed. Each size has a unique rocker, as well as the volume distribution. Simmer did a test for every table in every condition to guarantee a unique feeling. The two cut-away aft reduces the area in contact with water, keeping the same power and control. The stern can handle all the power that the rider can put.
Building Pro Carbon Sandwich contains object-oriented carbon 30 PVC sandwich degrees to deck and bottom, ensuring impact resistance and durability. To optimize the load distribution and durability the PVC vein along the costruzionje contains a table. The carbon reinforced rail are directed to create the optimum hardness. Each gram has been calculated, including those of the layer of color with a very thin resin despite her resistance. And’ also been used of Goretex © Airvent, that allows air to pass from the inner layers of the core of the table outside, of course guaranteeing the waterproofness.
For more information www.simmerstyle.com (Click on the picture for a larger view)
Design goals by Tomas Persson, Head of sails, and the research and development team were to improve the power, increase the thrust front while maintaining stability in all conditions of wind. Another objective was to reduce weight and strain of leech. The results of these improvements are seen in a sail faster, with more acceleration and control even in over-power conditions.
The new slat SX Supertube is a revolutionary development that creates a sail from the profile more accurate and radically improves the dynamisms of the sail. Are designed with the same technique of trees LEFT. This splint is designed to achieve a harmonious curve.
The material is made by the cue stick is used to control the rigidity along the curve, starting with a smooth fiberglass, then a 50% of carbon and a tube 100% carbon in the back. With these cues you can lock the centroid of the sail without losing control and stability.
Distributes the load inside the sail in a larger area when increases the voltage at the downhaul, increasing the durability and reducing the tension in critical areas of the wing. Adds stability and blocks the centroid of the sail.
The weight and’ been reduced on the layout Panel and splints.
Specific measures for speed
5.0 are 5.4 are specific measures 8 splints.
For more information www.simmerstyle.com.
source: Simmer Style
Traduzione automatica effettuata da Google
To report news, reports, suggestions and / or to contact the editors send an email to: firstname.lastname@example.org