With the launch of the new 5th generation of windsurfing boards, Simmer has set a new level in the field. Simmer has already demonstrated that its boards have excellent quality with guarantee rate of less than 1%, including equipment of its pro riders. Simmer buildings are equipped with a PVC sandwich laminate stringer that distributes the load across the hull. The technology of Electric Flex allows you to fork layup to move with the rider to create energy by conduction in turns. Cores made of EPS are cut with an accuracy of 1 mm and all laminations are made in a mold with air conditioning, which means that the accuracy of the weight and the shape is extremely precise. In addition and’ reduced the weight of the graphics and finishes, which means you can’ keep the same robust but make the Board very light. As for sails, Simmer uses only the highest quality materials and the best machining available.
That is the quality mark Simmer Style.
All boards 2020 have a hot-coat paint finish. This process combines color pigment with the outer layer of a hard epoxy gel coating, improves the longevity of the color of the table almost impossible to peel away and produces an extremely UV resistant coating that ensures that the color of the plates resist fading strong sunlight. All saving weight by replacing the primer and two coats of primer.
Electric Flex technology
The lay-up, the construction and reinforcement are all placed at points where the rider needs and work together to create the optimum stiffness to weight ration. The construction is moving with the rider, and not against the rider, which makes the Board more lively in every movement. This technology is called Electric Flex. For the wave boards Simmer uses a carbon layup 45 degrees for maximum strength and flexibility and to the boards using a carbon layup flatwater Simmer 30 degrees for greater vertical resistance. Basically, flexibility and stiffness where it is needed. The main features of the building is the stringer Sandwich PVC. This is the backbone of the table that absorbs and distributes the impact force on the whole construction of the table. This eliminates unnecessary breakage because stress is shared across the entire hull, creating a much more durable construction. The stringer also helps maintain the curve rocker during maneuvers.
As regards the equipment freestyle instead
Max Rowe and Tomas Persson have developed this sail all year. The fourth generation of Ace has a building mostly monofilm to give a feeling more direct and more effective power. The proportions were improved with slight boom lengths and shaft adjustments for further improvement of the balance between high end to low end power and control, allowing you to use smaller size in advance and keep them longer if the wind increases.
This shape is intended to bring the progressive freestyle to the next level with extreme acceleration and top speed combined with an explosive pop. A super quick but still progressive rocker is responsible for its remarkable speed and early planing, the round and smooth front panel V and the rails offer predictability of maneuvers and landings table slide. The large block of stern and the rails in the back allow you to get out of the water and increase the transitions whether aerial maneuvers that slide maneuvers. With a compact design and a linear distribution of volume rotations has never been easier.
As with all boards 2020, the WHIP introduces new hoat coat finish, almost impossible to come off: an extremely UV resistant coating that ensures that the color of the plates resist fading to strong sunlight, all saving weight and replacing the primer and two layers of coat paint.
Maggiori dettagli su www.simmerstyle.com/home/Default.aspx
Traduzione automatica effettuata da Google
To report news, reports, suggestions and / or to contact the editors send an email to: firstname.lastname@example.org